Water Well FAQs for North Texas Homeowners and Businesses
About barco
Why choose Barco?
Licensed. The majority of our full-time employees hold Texas licenses from TDLR, and you can check any of them on the TDLR License Search.
Trusted by the state. Jason Flynt, one of our owners, is a registered Subject Matter Expert for TDLR. He helps the state write and review water well licensing exams and review complaints against licensees.
Invested in local groundwater. Jason Flynt serves on the board of Upper Trinity GCD and Dylan Cyr, one of our owners, on the board of North Texas GCD, the groundwater conservation districts that help manage the aquifers our customers' wells draw from. Dylan also works with Groundwater Management Area 8, where districts across North Central Texas plan together for the long-term future of those aquifers.
Trained in-house. Every employee goes through Barco U, our apprentice and training program.
Fast response. A fleet of stocked service trucks, with most household well calls scheduled within 24 to 72 hours, not counting weekends.
Experienced. Serving North Texas since the early 1990s and more than 5,800 customers.
Maintenance made easy. Barco Assurance keeps your well on a regular service schedule.
Builders and commercial clients. Ask for our company resume for development and commercial projects.
-
We're a family-owned well company out of Justin, Texas, with 20+ full-time employees. Barco has served North Texas since the early 1990s, and the Flynt family has owned and run it since 2011, including brothers Jason and Justin Flynt, who both work in the business every day. Over those 30-plus years we've drilled, repaired and maintained water wells across North Texas, and today we look after more than 5,800 customers. Our crews are familiar with local aquifers, so we know what your well is pulling from and what it needs.
-
We serve Denton, Tarrant and Collin counties, with offices in Justin, Southlake and Frisco. That includes Keller, Southlake, Grapevine, Colleyville, Haslet, Westlake, Justin, Northlake, Ponder, Argyle, Bartonville, Flower Mound, Highland Village, Double Oak, Denton, Pilot Point, Prosper, Celina, Little Elm, Frisco, McKinney, Allen, Plano, Fort Worth and Dallas. If you're just outside that list, give us a call and we'll tell you straight whether we can help.
-
Yes. Barco's owners, Jason Flynt (#59359KPW) and Justin Flynt (#60324KPW), hold Texas water well licenses from TDLR, as does Dylan Cyr (#59773KPW). Sam Lopez, who manages Barco Assurance, holds License #61990KP. Every Texas license can be checked on the TDLR License Search, and we encourage you to look up anyone who works on your well. Our technicians also train at pump and motor manufacturers' schools and pass background checks.
when something goes wrong
-
Start with the easy things. Check that the breaker for the well pump hasn't tripped, and reset it once if it has. Look at the pressure gauge near your pressure tank; if it reads at or near zero, the pump isn't keeping up. If the breaker trips again or the gauge doesn't come back, stop there and call us at (817) 379-5283 or send an email to info@barcowellservice.com. Please don't open the pressure switch or well cap yourself, since both can carry live power.
-
Most calls are scheduled within these windows, not counting weekends:
Barco Assurance members: Scheduled first
Household drinking-water wells: 24 to 72 hours
Irrigation wells in summer: 48 to 96 hours, since summer is our busiest season
All customers in winter: 24 to 48 hours, weather permitting
-
Leave a voicemail at (817) 379-5283 or email info@barcowellservice.com. We check both periodically after hours and on weekends, and we respond in the order messages come in.
-
The most common causes are a pressure tank that has lost its air charge, a worn pump, a leak somewhere in the line, or a falling water level in the well. A tank problem usually shows up as the pump clicking on and off quickly, which wears it out early. A quick service call can tell which one it is before it turns into a bigger repair.
-
It stores a cushion of pressurized water so your pump doesn't start every time you open a faucet. That gives you steady pressure and fewer pump starts, and fewer starts mean a longer pump life. If your pump cycles on and off rapidly, the tank is the first thing we check.
-
Most submersible pumps last 5 to 7 years, depending on water quality, how hard the pump works, and how often it cycles. Most manufacturer warranties last 3 to 5 years. Repair cost depends mostly on how deep the pump is set, its size, and whether it's single-phase or three-phase. We diagnose first and give you a clear quote before any work starts.
-
Often, yes. Texas keeps driller's reports for wells drilled since 2003 in the TWDB well report database, which shows depth, casing and how the well was built. If you have your own copy, have it handy when you call. Older reports may be on file with the state too.
When we evaluate your system, we also complete a 30-point inspection and build a detailed service profile, so we can track its efficiency and working life over the years.
Water quality
-
Most wells in our area draw from one of three aquifers stacked on top of each other: the Woodbine on top, the Paluxy below it, and the deeper Trinity sands below that. Which one your well uses depends on where you live and how deep the well was drilled.
Woodbine Aquifer. Sandstone layered with shale and clay, found from Cooke and Grayson counties south through Denton, Collin, Tarrant, Dallas, Johnson and Ellis counties. It has three water-bearing zones. The upper zone gives limited water that is often very high in iron, the cause of most orange stains and iron bacteria. The lower zones give the most water. Woodbine water is generally fresh down to about 1,500 feet. A small number of Woodbine wells test above the drinking-water limit for fluoride, so a lab test is worth doing.
Paluxy Sand. The sand just above the deeper Trinity sands. In much of Wise, Denton and Tarrant counties it is the shallowest of these sands, so it costs less to reach, but it gives less water than the deeper sands. It is the main drinking-water aquifer in Denton and Tarrant counties, where these wells tend to run 400 to 900 ft deep, getting deeper from west to east.
Trinity sands (Twin Mountains and Travis Peak). The deepest and most productive sands, used by many cities and larger wells. Toward the Red River, these sands and the Paluxy merge into one thick sand called the Antlers.
State reports call water fresh when it has less than 1,000 milligrams per liter of dissolved minerals. Trinity water is fresh but very hard to the west, where the aquifer comes to the surface in Wise, Parker and Hood counties. Moving east, the aquifer lies deeper and the water picks up more minerals. State sampling of nearly 6,000 Trinity wells found fresh water across most of Denton, Collin, Tarrant, Wise and Parker counties, turning slightly salty in parts of Dallas and Ellis counties.
State well records show which aquifers are most used in each county we serve:
Collin: the Woodbine, in about half of recorded wells (78 of 160), then the Paluxy and Twin Mountains.
Denton: the Paluxy (244 of 616), Woodbine (146) and Twin Mountains (139).
Tarrant: the Paluxy, in about 6 of every 10 recorded wells (587 of 987), then the Twin Mountains (217) and Woodbine (155).
Cooke: the Antlers, in 173 of 247 recorded wells.
Wise: the Antlers (130 of 354), then the Twin Mountains and Paluxy.
Parker: the Paluxy (321 of 763) and the Twin Mountains and Travis Peak (275).
Hood: the Twin Mountains, in 280 of 329 recorded wells.
Montague: mostly older Cross Timbers rock (424 of 631), with the Antlers in the east.
These counts come from the Texas Water Development Board's groundwater database, which holds the wells the state has inventoried or sampled, so they show the mix of aquifers rather than every well in the county. North Texas GCD, which covers Collin, Cooke and Denton counties, usually does not separate the Paluxy from the rest of the Trinity, so a district record there may simply say “Trinity.”
Trinity water levels along I-35 have dropped 350 to more than 1,000 feet since pumping began a century ago, when many wells here flowed on their own. The drop has slowed as cities have moved to lake water. It is one reason we check the water level and set the pump at the right depth on every well.
Water can differ from one layer, and one well, to the next, so the best way to know yours is a lab test. We can help you test it and choose the right filtration.
-
Most wells in our area draw from the Trinity Aquifer. Its water is fresh but naturally very hard, high in calcium and magnesium, and hardest to the west where the aquifer comes to the surface in Wise, Parker and Hood counties. That shows up as scale on fixtures, spots on glass and buildup in water heaters. A softener or filtration system fixes it, and we can recommend one that fits your water.
-
That usually points to iron or iron bacteria. Both are common here, especially in wells drawing from the upper zone of the Woodbine Aquifer, which state reports describe as very high in iron. Iron bacteria are not usually a health risk, but they stain fixtures, clog equipment and cause odors. We test for iron bacteria and treat the well with chemical treatments chosen for your water. If the stains keep coming back, an iron filter is the long-term fix.
-
It depends on the aquifer and on the well itself, so have it tested before you drink it and once a year after that. Unlike city water, no one else tests a private well. Use a lab accredited for drinking water, and test again after flooding, repairs, or any change in taste, color or smell. For your water testing needs, call Barco at (817) 379-5283 or email info@barcowellservice.com.
Owning a well
-
We recommend a check-up twice a year: once in spring, before the heavy watering season, and once in fall, before winter. A check-up looks at pressure, the pump and motor, the pressure tank's air charge and the controls, so small problems get caught before they leave you without water. Barco Assurance can put these visits on a schedule for you.
-
Ask the seller for the well report and any service records, and get a well inspection before closing. Our inspection reports on flow, the pump and motor type, the pressure tank, and any work the system needs, so you know what you're buying.
-
Yes. Barco manages new well projects and brings in the best drilling subcontractors for each well's intended purpose. Before anything is drilled, we walk you through what matters for your property:
How you'll use the well. Irrigation only, household drinking water, or commercial use each call for a different well.
Who regulates drilling where you live. Groundwater conservation districts, cities and counties can all set rules, and some HOAs don't allow new wells.
Spacing. Texas rules set minimum distances between a new well and anything that could contaminate it, and your groundwater district can add its own spacing on top. The well must be at least:
150 ft from livestock or poultry yards, cemeteries, pesticide mixing sites and privies
100 ft from a septic drain field or spray area
50 ft from a septic tank or sewer line
50 ft from the property line
200 to 2,500 ft from other registered wells in Northern Trinity GCD, depending on the well's pumping rate, and 150 ft in Upper Trinity GCD
A deeper, pressure-grouted seal can shorten some of these: the 150 ft and 100 ft distances can drop to 50 ft, and the property line distance to 5 ft. We also place the well uphill from anything that could contaminate it, on ground that doesn't flood, and away from driveways and buildings.Water quality by aquifer. The Woodbine, Paluxy and deeper Trinity sands each have their own chemistry, from high iron in the upper Woodbine to very hard water in the Trinity, and water generally picks up more minerals the deeper and farther east the well goes. See “Which aquifer will my well draw from?” under Water Quality.
Cost versus yield. Deeper wells reach more water but cost more, so we match the well to how much water you need. Typical costs in most of the DFW metroplex:
100 to 200 ft with 4.5-inch PVC casing: around $15,000
200 to 400 ft with 4.5-inch PVC casing: $15,000 to $40,000
550 ft and deeper: most drillers switch to 4-inch steel casing, and the price goes up significantly
800 to 1,000 ft with 4-inch steel casing: starting around $100,000
Deeper than 1,000 ft: usually needs 6-inch or 8-inch casing, and most projects start around $250,000
Your groundwater district also limits how much water a well can pump. North Texas GCD, Northern Trinity GCD and Upper Trinity GCD all require a permit for any new well, and any well over 17.36 gallons per minute needs an additional special permit. In Upper Trinity GCD, new farm and livestock wells on a smaller tract are limited to 8 gallons per minute.Long-term care of the pump. Each aquifer has its own chemical and mineral profile, and that shapes the upkeep a well will need:
Woodbine wells 100 to 300 ft deep often produce iron above 5 ppm, which can stain light-colored flatwork, houses, roadways and trees. Some need regular chemical treatment to keep iron bacteria from building up sludge that can wear out pumping equipment early or slow the well's production.
Trinity water can be high in sodium, which can damage plants and cause problems in ponds and other surface impoundments.
Household wells may need filtration to balance pH, remove odors or soften hard water.
Bigger pumps and motors, and more complex controls, usually cost more each year to maintain and more to replace at the end of their life. Factoring in this long-term care when choosing an aquifer for your well's purpose gives you a realistic picture of the return on your investment.Access. Most drilling rigs for a well 200 ft or deeper are mounted on an 18-wheeler chassis and come with several more pieces of drilling equipment. We recommend a space large enough to park five concrete trucks in the shape of an X, on level ground with level access, and firm enough to carry the weight of the equipment.
Tight lots. The 150 ft and 100 ft distances under Spacing can drop to 50 ft, and the property-line distance to 5 ft, if the space around the casing is sealed with cement pumped under pressure from 100 ft deep (or the top of the water-producing zone in shallower wells) to the surface, in a borehole at least 3 inches wider than the casing (16 TAC §76.100(b)). The property-line distance doesn't apply at all where a groundwater district regulates spacing, deed restrictions set well and septic spacing, or the home is on public sewer (§76.100(a)(4)).
Flood-prone sites. If the well has to go where it can flood, it needs a watertight sanitary well seal and a steel sleeve from 24 inches below to at least 36 inches above the ground (§76.100(a)(3)).
Service later. Leave room for a pump truck to reach the well, keep it away from driveways and buildings, and record GPS coordinates at the wellhead. The well report and your district both need them.
Materials and drilling method. Almost every new well in North Texas is drilled with a rotary rig, because wells here commonly run several hundred feet or deeper. Dug, bored and driven wells rarely go past 50 ft, sit close to surface contamination and aren't a fit for modern use in our area.
Mud rotary is the usual method for the sands of the Trinity (Twin Mountains, Paluxy and Antlers) and the Woodbine. A drilling fluid made with drinkable water carries the cuttings up and holds the hole open.
Air rotary uses compressed air and a carbide bit for hard rock such as limestone, and needs a large compressor.
A log of every layer. As the hole goes down, the driller records each layer of rock and sand, where water is found and its quality. That log becomes your State of Texas Well Report and decides where the casing and screen go.
Casing. The hole is drilled at least 3 inches wider than the casing so grout can fill the space around it. Watertight casing keeps each layer's water in its own zone and keeps surface water out. Texas approves PVC well casing (SDR 26 or heavier), new steel (schedule 10 or heavier) and certified fiberglass, chosen to handle the depth and grouting pressure and sized for the pump. The casing ends at least 12 inches above ground.
Screen and gravel pack. In sand, a manufactured well screen with the right slot size sits at the bottom, and graded gravel around it holds back the formation sand. Texas requires a manufacturer's screen on household and landscape irrigation wells.
A sanitary seal. At least the top 10 ft of the space around the casing is filled with cement, bentonite grout, or 8 ft of granular bentonite under 2 ft of cement, placed from the bottom up so it leaves no gaps.
Surface finish. A concrete slab at least 2 ft out from the casing on every side and 4 inches thick, sloped to drain away, or a steel or PVC sleeve set in cement, sheds water away from the well.
Call us at (817) 379-5283 or send an email to info@barcowellservice.com to talk through your property.
-
It depends on where you live. Local groundwater districts set the rules: Northern Trinity GCD covers Tarrant County, and North Texas GCD covers Collin, Cooke and Denton counties. We check the district's rules for your property, keep the required distance from septic systems and property lines, and file the state well report when the well is finished.
-
Texas law requires landowners to plug or cap abandoned or deteriorated wells, because an open well can let surface water and contaminants reach the aquifer, and it can be a safety hazard. We plug wells to state standards and file the plugging report for you.
-
Winterize before the first hard freeze, or ideally once nights start dropping into the mid-30s. We can schedule a short winterizing visit to check and protect your equipment. Between visits, insulate exposed pipes, the pressure switch and the pressure tank. Keep the well house above freezing with a heater made for the job. Call us before trying to thaw lines with an open flame.
-
Most of a North Texas summer water bill goes to irrigation, and irrigation is billed at the highest rates. In several North Texas cities, water above 30,000 gallons a month costs $13 or more per 1,000 gallons. Watering a half-acre lawn with one inch of water a week takes about 13,600 gallons a week. At Dallas' current rates, that adds about $600 a month through the summer. A well delivers that water for the cost of electricity and upkeep, so it can pay for itself over its life.
-
Usually not. City watering schedules apply to city water, so a private irrigation well lets you water when your landscape needs it. Your local groundwater district can adopt drought rules of its own, and some HOAs have rules too, so it's worth a quick check. Watering early in the morning still gets the most out of every gallon.
Barco Programs
-
Barco Assurance is our maintenance plan for your well's pumping equipment. Regular service is the best way to make that equipment last.
It starts with a full inspection. On the first visit we check every electrical and mechanical part of your well system, then give you a report and a repair plan if anything falls short of the manufacturer's standards.
Two check-ups a year. Once your equipment meets those standards, we schedule an inspection and maintenance visit twice a year.
Priority scheduling. If something goes wrong, members go to the front of the line.
Covered repairs. Parts and labor are waived for future repairs to covered equipment. Covered equipment includes the motor, pump, submersible wire and splice kit, drop pipe, check valves, well seal, bullhead assembly, pressure tank, control box, pressure switch, sand separator, the plumbing Barco installed between the well, pressure tank and sand separator, and chemical treatment.
One simple monthly fee. You can cancel anytime with 30 days' notice.
Contact our office at (817) 379-5283 or info@barcowellservice.com to schedule an Assurance evaluation.
-
Yes. We design filtration and treatment for well water, including softening and iron removal. We start by testing your water so the system fits your water chemistry.
-
Call (817) 379-5283, email info@barcowellservice.com, or use the contact form at barcowellservice.com/contact. Our office is open Monday through Friday, 7:30 a.m. to 5:00 p.m.